 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ZF SERIES ZF - SERIES Single Output DC/DC Converter 2" x 1.6" x 0.4" up to 30 Watts Output T O 30 WATTS Product Features Single DC/DC Converter, up to 30Watts Ideal for Telecom and Networking Applications 2:1 Input Range, High Efficiency Industry Compatible Pin Out, 2" x 1.6" Form Factor Remote On / Off, TTL, Trimmable +/-10% Six Side Shielded, Low Profile 0.4" Height No external Input or Output Filtering required Regulated Output 1600VDC I/O Isolation, UL, CUL, TUV, CE Approvals pending Brief Overview The ZF Series of high efficiency DC/DC converters are available as single output versions, 1.8VDC, 2.5VDC up to 15 VDC, with 30 Watts of output power. The product is ideal for Telecom and Networking applications. The converter is designed for a 2:1 input range, either nominal 24 Volt (18VDC -36VDC) or nominal 48VDC (36VDC75VDC). The converter is PCB mountable, the package has a form factor of 2"x 1.6"x .04". The standard specifications include the Pi-input filter, external trimming of +/- 10%, excellent load regulation, and short circuit protection. The isolation voltage meets the >1600VDC telecom requirements. TYPICAL APPLICATIONS: - 24Vdc or 48Vdc Telecom - On-Board Distributed Power - Low Profile & Height PCB mount SPECIFICATIONS: Nominal Input: TABLE 1 Model Number ZF24S1.8-6000 ZF24S2.5-6000 ZF24S3.3-6000 ZF24S5-6000 ZF24S12-2500 ZF24S15-2000 ZF48S1.8-6000 ZF48S2.5-6000 ZF48S3.3-6000 ZF48S5-6000 ZF48S12-2500 ZF48S15-2000 Input Voltage VDC 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 36-75 Output Volts /Amps VDC 1.8 // 6 2.5 // 6 3.3 // 6 5 // 6 12 // 2.5 15//2.0 1.8 // 6 2.5 // 6 3.3// 6 5 // 6 12 // 2.5 15 // 2.0 Effic. % 82 85 86 88 91 91 83 85 87 89 91 91 48VDC (36-75VDC) 24VDC (18-36VDC) Output Voltage: see Table 1 Output Power: 30W Efficiency: (see table) Isolation Voltage: 1600VDC Operating Temperature: -25C to +71C Max. Case Temp. 100C Dimensions: 2" x 1.6" x 0.4" For further information or Application Support: www.wallindustries.com or call 1-888-597-WALL 1 603 778 2300 W W W.WALLINDUSTRIES.C O M T O 30 WATTS Specification INPUT VOLTAGE: REMOTE ON/OFF INPUT FILTER OUTPUT VOLTAGE OUTPUT VOLTAGE Set Point OUTPUT CURRENT OVERCURRENT PROTECTION OUTPUT RIPPLE SHORT CIRCUIT PROTECTION LINE REGULATION LOAD REGULATION TRANSIENT RESPONSE OUTPUT TRIM EFFICIENCY ISOLATION VOLTAGE ISOLATION RESISTANCE SWITCHING FREQUENCY OPERATING TEMPERATURE STORAGE TEMPERATURE WEIGHT DIMENSIONS CASE MATERIAL ZF SERIES Method 48V version 24V version TTL Pi-Filter Min. 36 18 Typ. 48 24 Max. 75 36 Units Volts Volts TTL logic Volts % of Vout A % of Iout mV peak/peak see table +/- 1% see table Limiting 20MHz BW continuous HL / LL 10-100% load within +/-1% Vout external Res. <70mV p-p +/- 0.2% +/- 0.5% <500u sec +/- 10% see table >1600VDC 300kHz typ. -25 -55 case w/o pin ~ 2 oz 2"x1.6"x0.4" +71 +105 % of Vout VDC / 10sec In/Out/ >100MOhms degree C degree C inches Ni coated Cu All case and Pin-to-Case dimensions are for reference only, unless otherwise noted. All DC/DC converters should be externally fused at the front end for protection. Significant capacitive load at the output of the converter may inhibit the start-up and operation, consult factory. Pin Assignments: DIA. 0.04", 6 PLACES Pin 1 2 3 4 5 6 7 +Vin -Vin Rem No Pin +Vout -Vout Trim W W W.WALLINDUSTRIES.C O M 603 778 2300 2 |
Price & Availability of ZF24S12-2500
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |